Safety Advice; Declaration Of Conformity - Resol Smart Display SD3 Instrucciones

Smart Display SD3

Safety advice

Please pay attention to the following
safety advice in order to avoid danger
and damage to people and property.
This product is to be used in accor-
dance with its intended use only (see
pages 2 and 3).
The device is to be operated on
safety extra-low voltage via the
RESOL VBus .
®
The surface material is susceptible to
scratches.
Avoid scratches on surfaces when
arranging the device.
Technical Data
Housing:
High-grade steel frame with
wood elements
Dimensions: 150 x 165 x 24 mm
Protection type: IP20 (suitable for dry
rooms)
Protection class: III
Display: Numerical 7-segment LED
display
Segment size 7,5 x 10 mm, 10° digit
inclination
Ambient temperature: 0 ... 40 °C
Power supply: via RESOL VBus
Bus connection: RESOL VBus
Scope of delivery
1 x Smart Display SD3
1 x wall-mounting bracket
1 x accessory bag:
2 x screw and dowel
1 x wooden rod
6
|
Contents
Safety advice ............................................................................................. 6
Technical data and function survey ........................................................ 7
1. Installation ........................................................................................... 7
1.1 Mounting ..........................................................................................................7
2. Connection and commissioning .....................................................................7
3. Displays .......................................................................................................................8
Imprint ................................................................................................... 8
Errors and technical changes excepted.
The Smart Display SD3 is designed for simple connection to RESOL controllers
via the RESOL VBus
lector and store temperatures as well as energy yield of the solar system. The
use of high-efficient LEDs and filter glass assures a high optical brilliance and
good readability - even in poor visibility conditions and at a larger distance. An
additional power supply is not required.
Note:
®
Remove protective film from front plate or housing if necessary.
®

Declaration of conformity

We, RESOL Elektronische Regelungen GmbH, D-45527 Hattingen, declare un-
der our sole responsibility that our product Smart Display SD3 complies with
the following standards:
EN 55 014-1
EN 60 730-1
According to the regulations of the above directives, the product is labelled with
:
89/336/EWG
73/ 23/EWG
Hattingen, 13.06.2007
RESOL Elektronische Regelungen GmbH,
ppa. Gerald Neuse
® for visualisation of the data issued by the controller: col-
B