Idiomas disponibles
Idiomas disponibles
13. Disengage the inline connector lever lock. Inspect the
instrument panel side connector for the voice prompt cir-
cuits. Cavity C10 Circuit 5836 with Gray insulation. Cavity
C11 Circuit 5837 with Purple insulation. Cavity C12 Circuit
5838 with Bare insulation. The circuits on the console
wiring side are always present. If circuits 5836, 5837, and
5838 are not present on the instrument panel wiring side,
then the voice prompt wiring jumper, 19202083, is needed.
If circuits 5836, 5837, and 5838 are present on the instru-
ment panel side, then the voice prompt wiring jumper,
19202083, is not needed. See Figure 2.
FIGURE 2
NOTE: Follow next steps to complete navigation radio installa-
tion.
14. Disengage accessory trim panel by pulling rearward. Care-
fully pull trim panel away from instrument panel releasing all
fasteners. See Figure 3.
FIGURE 3
Full Size Truck and SUV Navigation Radio Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
15. Below the radio, remove the 2 screws that retain the acces-
sory switches to the instrument panel.
Go to Step 26 for non-Hybrid (-HP2) vehicles.
For Hybrid (&HP2) Vehicles Only
16. Remove park brake release handle bolt (1). Slide the park
brake release handle (3) forward to remove it from the knee
bolster. Figure 4.
FIGURE 4
17. Remove instrument panel left outer trim cover (1). Figure 5.
FIGURE 5
PART NO.
REV25MR08
INSTALLATION INSTRUCTIONS
DR
TITLE
Full Size Truck and SUV Navigation Radio Kit
PART NO.
19153971
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19153971
SHEET
2
SHEET
2
30
OF
30
OF
