active fun TP521 Instrucciones De Montaje, Mantenimiento Y Uso página 4

Tabla de contenido
TP521 TP522 TP523 Swing In5033 Issue-D 27.7.17.qxp_TP521 TP522 TP523 Swing In5033 Issue-D 27.7.17 27/07/2017 16:20 Page 4
INSTRUCTIONS FOR SSEMBLY, M INTEN NCE ND USE OF TP TOYS
Please read carefully and keep all enclosed information or future reference.
1. SSEMBLY ND S FETY INFORM TION
TP toys must be assembled by an adult. They must be erected exactly in accordance with the assembly instructions. Enlisting the aid of a
helper will make assembly easier. We recommend that you place small parts on a tray, or something similar, to prevent the frustration and
disappointment of mislaying them. Please take care during assembly as the manufacturing process can sometimes result in the
occasional sharp edge and small pieces of waste metalwork. Should there be any missing parts, the toy must not be used until
replacement parts have been fitted.
2. SITING
Under no circumstances should any of our toys be positioned on hard surface such as concrete or asphalt, unless the ground under the
toy plus the recommended freespace area is covered with a safety surface (please refer to diagram on page 13). Examples of suitable
surfaces are grass, sand or a play surface intended for this use. TP toys should be sited on level ground.
3. US GE
TP toys are designed and made for family outdoor domestic use only by children aged between 3 and 10 years, unless otherwise stated,
and must not be used by anybody else. Misuse can result in injury. Warning only for Domestic use. For outdoor use only.
4. SUPERVISION
Children should always be supervised while they are playing on TP toys and should be instructed not to use the toy in an inappropriate or
hazardous manner. We recommend that they do not wear loose-fitting clothing or jewellery than may catch or snag during play. Children
should not wear cycle helmets while playing on TP toys.
5. WE THER CONDITIONS
Special care should be taken as weather conditions change. In particular, outdoor toys can become slippery in wet weather and tongues
and lips can stick to metalwork at subzero temperatures. In warmer and sunnier weather, parts can become hot, and the temperature
should be regularly checked during play, especially metal parts and slides. If there is any doubt over safety then the toys should not be
used. We recommend that you check the product in relationship to the orientation of the activity toy (e.g. swings) in relation to its exposure
to the sun. Product may become hot!
6. M INTEN NCE.
With all toys it is vital that the equipment is checked regularly and often by an adult. The complete toy should be checked at least once a
month, and particular attention should be paid to connections and fastenings. If any parts exhibit signs of wear and tear, they may need
to be replaced. Checks must be carried out at the beginning of the usage season as well as at regular intervals throughout the usage
season. Check all nuts and bolts for tightness and tighten when required. Failure to do this may result in the product malfunctioning and
causing injury. Children must not be allowed to use the toy until properly installed and checked. Galvanised tubular products may require
occasional maintenance. If surface rust appears it should be removed with either a wire brush or coarse sandpaper, and the area treated
with a non-toxic paint.
7. SWING FR MES
These must always be used with the stakes provided. We recommend that you concrete them in place (please refer to diagram on page
12). Never set the legs of a swing frame in concrete.
8. SWINGING TOYS
When fitting swinging toys it is vital that moving parts have no metal to metal contact. Children should be instructed not to pass in front of
or behind moving items, not to twist or swing an empty swing seat, and not to get off a swinging toy when it is in motion. Please refer to
freespace diagram on pages 14.
9. ROPES
These ropes will degrade over time. When signs of degradation appear, the toy should be replaced.
10. FIRE RISKS ND DISPOS L
Never allow TP toys to be placed or used near a fire. When it becomes necessary to dispose of your equipment, remove all bolts and
disassemble. Store out of the reach of children until it can be properly disposed of.
These instructions are issued in the interest of child safety, and we do ask you to follow our advice.
Single/Double/Triple Swing Frame
4
Tabla de contenido
loading

Este manual también es adecuado para:

Tp522Tp523

Tabla de contenido