Technical Data; Noise / Vibration Information - Ratio MR1500NM Manual De Instrucciones

TECHNICAL DATA

Type MR1500NM (PDH-designation of machinery, representative of hammer)
Voltage
Power input
No load speed
Impact rate
Impact energy
Max drilling capacity
Steel
Masonry
Wood
Protection class
Machine weight

NOISE / VIBRATION INFORMATION

A weighted sound pressure: L
A weighted sound power :
K & K 3.0 dB(A)
PA WA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN60745:
Hammer drilling into concrete
Chiseling
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
28
: 96.4 dB(A)
pA
L : 107.4 dB(A)
wA
Vibration emission value a
Uncertainty K= 1.5 m/s
Vibration emission value a
Uncertainty K= 1.5 m/s
230-240 V~50 Hz
= 19.327 m/s
h,HD
2
= 17.879 m/s
h,Cheq
2
1500 W
850 /min
4400 rpm
5.5 J
13 mm
32 mm
40 mm
/II
4.9 kg
2
2