Technical Data; Noise Information; Vibration Information - Ratio PRO XF20-P Manual De Instrucciones

TECHNICAL DATA

Type CDH18WG(CDH-designation of machinery, representative of rotary hammer)
Voltage
No load speed
Impact rate
impact energy
Max. drilling capacity
Machine weight
Charger Input
Charger Output
Battery capacity
Charger Protection class

NOISE INFORMATION

A weighted sound pressure
K =3dB(A)
pA
A weighted sound power
K =3dB(A)
wA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Mode description
Hammer drilling into
concrete
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
Steel
Wood
Concrete
Vibration emission value
a =9.265 m/s
2
h,HD
100-240V~50/60Hz,78W
14.4-20V
Uncertainty K
K = 1.5m/s²
20V
0-850 /min
0-4800/min
1.3J
10 mm
16 mm
13mm
1.6 kg
3000mA
4.0 Ah Li-ion
/II
L : 81.38 dB(A)
pA
L : 92.38 dB(A)
wA
33