Tabla de contenido
1.0
CONTROL PANEL
INDICATION ON THE DISPLAY
- LED button
- LED button
- LED button
The blinking stands for a request for actuation, which cannot be performed up to the term of the times that delay it.
SET-POINT (Desidered temperature value)
- Press the SET
- after two seconds, the set value blinks.
- Press UP
or
- Press the SET
MANUAL DEFROST
Besides the automatic defrost, it is possible to activate a manual defrost by pressing the DOWN
5 seconds (it occurs only in the appropriate temperature conditions).
PJ32Y0H
indicates compressor ON.
indicates defrosting ON.
indicates presence of alarms.
button for one second to display the Set-Point value.
DOWN to increase or decrease the Set-Point value.
button once/more to confirm the new Set-Point value.
0
I
4280 47455 1 ac
• 4
button for more than
I
GB
F
D
GB
E
Tabla de contenido
