Maintenance And Cleaning - Klarstein 10030243 Manual Del Usuario

Defrost
Freezer needs to defrost by hands. When the frost is more than 5mm, pls take off the plug. Remove the frost
with ice spade, otherwise it influences function.
1. Power off and pull the plug.
2. Take out all food to cool space.
3. Take out the shelves.
4. Remove ice and frost with ice spade, or let it to melt naturally.
5. Clean the remaining water with neat soft cloth.
6. Put the food back. Power on and start.
Note: if want to fasten the progress of defrosting, please put a bowl of hot water on the rack and
close the door. Please don't use metal tool or electric heater to defrost. That may damage the evapo-
rator.
Cleaning
The inner of the refrigerator need clean often in order to keep it fresh and clean
First, please power off.
Then use soft towel with water or neutral cleanser to scrub away it, later use dry-cloth to wipe up it.
Note: Prohibit pouring water to the outer of the refrigerator; this will affect the isolation of the ma-
chine. Don't use hot water, acid, alkali, gasoline, benzene, caustic cleanser, alcohol, and hard brush
to wipe the plastic parts.
How to change bulb
Take off the power plug. And take off the lamp cover at the back of thermostat box. Anti-clockwise, remove
the old bulb. Then, clockwise, change the new bulb. Put back the lamp cover.
Put out of operation
If you want to stop using it for a long time, please power off, and follow the above information to clean it and
dry it naturally, later keep it in the dry and clean place. Remember to keep the door a little gap in order not to
make the door seal stick with the cabinet.

Maintenance and Cleaning

16