Disposal - geberit 116.023.FW.1 Operación Manual

Ocultar thumbs Ver también para 116.023.FW.1:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Setting the flush time
1
Remove the cover plate.
2
Set flush time.
Battery-operated flush control:
Remove the battery box and
disconnect the plug connection.
Reconnect the plug connection after
at least 20 seconds.
Mains-operated flush control:
Remove the mounting frame.
Mains-operated flush control:
Disconnect the plug connection
from the power supply unit and plug
it in again after at least 20 seconds.
Within 5 seconds, hold your hand
immediately in front of the flush
control. The new flush time
corresponds to the amount of time
your hand is held there (maximum of
15 seconds). The flushing process is
actuated when your hand is
removed.
Result
The flush time that has just been set
is confirmed by flashing. Number of
flash pulses = flush time in seconds.
3
Mount the cover plate.
B1255-001 © 08-2015
966.920.00.0 (00)

Disposal

Constituents
This product meets the requirements of
Directive 2011/65/EU RoHS (restriction of
the use of certain hazardous substances in
electrical and electronic equipment).
Disposal of waste electrical
and electronic equipment
In accordance with Directive 2012/19/EU
(WEEE-II), manufacturers of electrical
equipment are obliged to take back old
equipment and to dispose of it
appropriately.
The symbol indicates that the product
cannot be disposed of with non-recyclable
waste. Old equipment should be returned
directly to Geberit, where it will be disposed
of appropriately.
Please contact your responsible Geberit
sales company for addresses to which
equipment can be returned.
EN
15
Tabla de contenido
loading

Este manual también es adecuado para:

116.031.11.5116.031.21.5116.031.46.5

Tabla de contenido