Maintenance; Maintenance Interval; Replacing Batteries - geberit 116.023.FW.1 Operación Manual

EN

Maintenance

Structure of this document
Illustrations for this chapter are shown at
the end of this document. References to the
corresponding illustration sequences are
shown as follows:

Maintenance interval

The following maintenance work is required
as necessary or at the specified intervals at
the latest:
Maintenance
Clean the surface of
the cover plate
Clean the urinal
ceramic
Replace batteries
Have the basket filter
cleaned by a skilled
person
Activating cleaning mode
Activate cleaning mode with the Geberit
Service Handy or the Geberit Clean Handy.
To clean the urinal ceramic and the cover
plate, suppress the flush actuation for a few
minutes.
Cleaning
Clean the cover plate and sensor window
with a mild, liquid cleaning agent.
Aggressive and scouring cleaning
agents may damage the surface of
the cover plate and sensor window.
Never use aggressive cleaning
agents that contain chlorine or are
acidic, abrasive or corrosive.
14
Interval
Weekly
Daily
When the battery
indicator lights up
At least every
2 years

Replacing batteries

Used batteries are displayed as follows:
LED in the Meaning
sensor
window
Flashing Battery voltage is low,
flush still actuates
Lights up Battery is dead, flush no
longer actuates
Prerequisite
Two new alkaline manganese batteries of
type AA, 1.5 V, are ready.
1
Remove the cover plate.
2
Replace the batteries.
Remove the battery box and
disconnect the cables.
Replace the batteries.
Do not dispose of batteries in
domestic waste.
Connect the cables and install the
battery box.
3
Mount the cover plate.
B1255-001 © 08-2015
966.920.00.0 (00)