How To Operate - Nostalgia Products CCM305KIT Manual De La Instrucción

HOW TO OPERATE

1. First, find a stable surface near an electrical outlet before starting. Make sure the cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Plug in unit at the OFF position.
3. Turn unit ON position and allow it to run for at least 10 minutes before
adding sugar. This will allow the Extractor Head to heat.
4. Measure level tablespoon of sugar with measuring spoon supplied
with your COTTON CANDY MAKER. Pour sugar into the center of the
Extractor Head and spin the Extractor Head to level the sugar.
5. Switch to ON position.
6. When you see the cotton candy web begin, collect the cotton candy on the cone by
holding the cone vertically. Rotate the cone with your fingers while you circle the bowl.
7. Once cotton candy has collected on the cone, hold the cone in a horizontal position
over the Extractor Head while still rotating the cone with your fingers. Continue
turning the cone with your fingers while the cone is in the horizontal position
and move from side to side making sure to collect all the cotton candy.
8. Repeat above steps by adding another measure of sugar into the Extractor Head and
starting again. The cotton candy should flow more quickly as the unit is sufficiently warm.
9. Never use ingredients other than pure granulated sugar. DO NOT overfill the
Extractor Head. This will cause clogging and unit will not work properly.
10. By following these simple instructions, using your COTTON CANDY MAKER will be a fun
experience for kids of all ages and will bring the excitement of a carnival to any occasion.
6