HMM Diagnostics SmartLab fit W Manual De Usuario página 66

Changing the measuring unit
The display shows „SCL" and the current measuring unit mg/dL or
mmol/L. If you want to change it, keep the scroll wheel pushed
for longer than 10 seconds. A double signal tone indicates that
the unit has been changed.
Exiting the setting mode
By continually pushing the scroll wheel you can check the set-
tings again or alternatively leave the setting mode by pushing
the S-button. You are now in the start up mode.
Further possible steps
• By inserting a test strip, the meter will be ready for running a
blood glucose test
• By turning the scroll wheel you enter the test memory
• By pushing the scroll wheel you enter the insulin mode
• By shortly pressing the S-button, you can switch off the meter
Note: After choosing another measuring unit, all stored values
will be automatically converted. The long time of 10 seconds for
changing the unit is necessary to avoid accidential changes.
The meter switches off automatically after 2 minutes, if no test
strip is inserted or the S-button or scroll wheel is used.
66