Setting Date, Time And Alarms - HMM Diagnostics SmartLab fit W Manual De Usuario

Setting date, time and alarms

Setting the current time and date in your meter is important
if you use the meter memory or if you want to download your
results to a computer. Display of current time and date can be
helpful when copying your obtained results to log book by hand.
Date and time have to be changed before first-time use and after
changing batteries, if indicated data is wrong. Proceed as fol-
lows:
Enter the setting mode
With the meter switched on (Start-up Mode „- - -„ and „Test strip
symbol" flashing), press and hold the S-button for at least 6
seconds to enter setting mode. The last two digits of the current
year flash in the middle of the LCD display.
Note: If indicated date / month / day / hour / minute and unit
are correct you can save settings by pressing the S-button once.
If you want to change the current value, turn the scroll wheel
to either increase or decrease the numbers and store by pressing
the scroll wheel. You can leave the setting mode at any point by
pushing the S-button.
63