Install The Battery Pack; Remove The Battery Pack; Operation; Controls - GreenWorks Pro Ultrapower X-Range 60 60TB16 Manual Del Operador

EN
8.4

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.5

REMOVE THE BATTERY PACK

1. Push and hold the battery release button (1).
2. Remove the battery pack from the machine.
9

OPERATION

Before you operate the machine, read and understand the
safety regulations and the operation instructions.
Be careful when you operate the machine.
9.1

CONTROLS

9.1.1 ON/OFF BUTTON
Push this button to connect and disconnect the electrical
circuit of the machine.
WARNING
1

IMPORTANT

WARNING
English
Green light on (G): the electrical circuit of the machine is on
(ON). The machine prepares to operate.
If you do not use the machine for more than 30 s, the
machine stops.
Lights off: the electrical circuit is off (OFF).
Do not keep your finger on the button when you move the
machine to prevent accidental start.
9.1.2 REVERSE BUTTON
1. If grass winds around the trimmer head or blade, push the
reverse button.
2. Start the machine again.
9.1.3 LED INDICATION
1. 4 green lights are on when you start the machine.
2. Push the speed button forward to adjust the speed.
9.2

ATTACH THE SHOULDER STRAP

1. Attach the carabiner to the carrying ring on the drive
tube.
8
NOTE
IMPORTANT
①
②