Assemble The Trimmer Head; Transportation And Storage; Move The Machine; Store The Machine - GreenWorks Pro Ultrapower X-Range 60 60TB16 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN
4. Remove the trimmer head.
10.6

ASSEMBLE THE TRIMMER HEAD

1. Put the trimmer head onto the housing.
2. Install the nut.
3. Put the metal rod in the specified angle transmission hole
to fix the trimmer head.
4. Tighten the nut on the trimmer head counterclockwise
with a wrench.
You must install the cut-off blade when you use the trimmer
head.
11
TRANSPORTATION AND
STORAGE
11.1

MOVE THE MACHINE

When you move the machine, you must:
Wear gloves.
Stop the machine.
Remove the battery pack and charge it.
Assemble the blade guard.
D
E
H
IMPORTANT
English
11.2

STORE THE MACHINE

Remove the battery pack from the machine.
Make sure that children cannot come near the machine.
Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
F
damage.
12

TROUBLESHOOTING

Problem
Possible Cause
The ma-
No electrical con-
chine does
tact between the
not start
machine and the
when you
battery pack.
push the
trigger.
The battery pack is
depleted.
The lock-out but-
ton and trigger are
not pushed at the
same time.
12
Solution
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
Charge the battery pack.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.

Capítulos

Tabla de contenido
loading

Tabla de contenido