24
D
elay Start (Reservation) Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time, not the start time.
1
Press the POWER button to turn power on.
2
Press the Course button to select the washing course.
3
Press the Delay (Reservation) button.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
6
Close the lid.
Finish
NOTE
• Finishing time can be delayed from 3 ∼ 18 hours. Delaying 3 ∼ 12 hours can be done in 1 hour time
intervals and from 12 ∼ 18 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press
the Delay Start (Reservation) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program. (The laundry will be wrinkled if left for a long time after spinning.)
• Select the Course for laundry on the Control panel. This Course
will not work in Wool and Tub Clean Course
• The light will 'Delay' turn on and 'Time Left'
be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, By make
the number 9:00 pressing the Delay button repeatedly.
(RES. = Delay)
• The appropriate quantity of Detergent marked next to the
Water of Water• Detergent.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid.
• When you press the START/PAUSE button the light will blink.
• Water will then be let in again 2 minutes after the start of the
to supplement the water the laundry has absorbed.
• The washing will be finished according to the delayed time.
➨
will
