1. Manuales
  2. Marcas
  3. Scott Manuales
  4. Dispositivos de Protección
  5. WORKS FILM SYSTEM
  6. Manual de instrucciones

Scott WORKS FILM SYSTEM Manual De Instrucciones

Ocultar thumbs
1
2
3
4
5
6

Enlaces rápidos

GOGGLES
W O R K S F I L M S Y S T E M
W W W. S C OT T- S P O R T S .C O M
loading

Manuales relacionados para Scott WORKS FILM SYSTEM

Resumen de contenidos para Scott WORKS FILM SYSTEM

  • Página 1 GOGGLES W O R K S F I L M S Y S T E M W W W. S C OT T- S P O R T S .C O M...
  • Página 2 SCOTT WORKS FILM SYSTEM SCOTT WORKS FILM SYSTEM The WORKS Film system is made up of the SCOTT Anti-stick Grid and two individual Roll- off canisters. INSTALLATION OF THE GRID AND CANISTERS 1. Before installing the grid and the canister open the canisters. Lift the end of the Mudflap and assemble the canisters to the grid by fitting the Canister pins in the Grid holes.
  • Página 3 BACK SIDE OF LENS...

  • Página 4: La Instalación De La Película

    INSTALLATION OF THE FILM: 1. Remove the door from the supply canister and remove the tape from the film. Expose the first few centimetres of film and orient the film roll (A). 2. Insert the film roll into the supply canister and position the exposed tail of film beneath the Mudflap, the lug helps.
  • Página 5 NOTE LOAD FILM ROLL SO IT FEEDS FROM BOTTOM OF ROLL TOWARDS CANISTER...

  • Página 6: Consejos Complementarios

    • Store your goggle in a bag after it has been properly cleaned and loaded. • When advancing the film across the lens use the SCOTT Anti-stick grid as a guide and tuck the film under the Mudflap for best performance.