Pre-Operation Check; Engine Oil Level - MADER KZ9500E Manual Del Usuario

3.Pre-operation Check

Please do the following preparation before operation to ensure the reliable
function of the unit, or it may result in equipment damage and service life
abridgement.

3.1 Engine Oil Level

Little engine oil is filled in the engine when you purchase the unit. Before
operating the unit, please fill in adequate amount of engine oil of the proper
type.
The oil capacity of the machine is 1.1L for 7500(E).
SAE10W-30 engine oil is recommended for general,
all-temperature usage. Other viscosities oil (as shown
in the chart) may be used when the average
temperature in your area is within the indicated
range.
Surrounding Temperature
NOTE: Do the check only when the unit stops operation on a level ground.
3.1.1 Take out the oil filler cover and have the dipstick cleaned(Figure 9)
Fig 9 Fig 10
3.1.2 Insert the dipstick into the oil filler hole without screwing it in (Figure 10)
3.1.3 If the oil level is below the lower mark of the dipstick, add oil to its higher
mark (Figure 11)
7