Kohler K-7344 Manual Del Usuario página 3

Thumb
Screw
Align the
notches.
Valve
Spline
1. Install the Handle Assembly
IMPORTANT! This procedure must be followed to ensure proper
installation and handle operation.
IMPORTANT! Sidespray functionality depends upon the alignment
of the valve and the handle positions. Before assembling the
product, rotate both the valve spline and the sidespray handle
counterclockwise to their respective closed or OFF positions.
Turn the handle counterclockwise to the OFF position.
Remove the valve body from the handle assembly.
With a phillips screwdriver, rotate the valve spline
counterclockwise to the closed or OFF position. Do not unthread
the screw!
Insert the O-ring into the groove of the escutcheon.
Slide the escutcheon with the O-ring onto the handle assembly.
Insert the handle assembly through the mounting hole.
With the handle still in the OFF position, turn the entire handle
assembly in the mounting hole until the handle is aligned in the
desired OFF position.
Kohler Co.
Handle
Handle Assembly
Escutcheon
O-Ring
Nut
Valve Body
3 1217379-2-A