Changing Battery - Ezviz T1 Manual Del Usuario

Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
дрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.
Maintenance

Changing Battery

When the detector's battery is low, the detector will send a low battery
warning to the EZVIZ app to remind you to change the battery.
- Take the detector off from the base.
- Open the detector's battery cover and then change the battery.
- Install the detector back to the base.
Debugging
Do not disassemble the device or adjust the settings without authorization.
Disassembling the Detector
- Open the detector's battery cover and loosen the screws on the two
sides of the battery slot, as shown in the following figure.
- Separate the front cover and the rear cover, you can see the DIP switch
on the main board.
При обращении используйте промокод AND-PDF и получите скидку.
Screws
73