Mitsubishi Electric DX-TL2500E Manual Del Usuario página 3

Front View (Inside of the door)
SPLIT/
SEQUENCE
ZOOM
0
POWER TIMER
23 24
17. WARNING RESET button
This button is used to clear on-screen warning dis-
play and clear data.
18. SET UP button
Press this button to display the <SETTINGS> menu.
19. SEARCH button
Press this button to display the <SEARCH > menu.
20. COPY button
Press this button to display <COPY> menu. This
button lights when performing copy operation. Cop-
ies cannot be made when the copy device is not con-
nected or a card is not in the COMPACT FLASH slot.
21. ALARM INTERRUPT button
When pressing this button, the unit will not accept
alarm signals or motion detection for 5 minutes. Dur-
ing this time, the button will flash. This allows device
set-up changes to be made without being disturbed
by ALARMS. Press this button once again to cancel.
22. PLAY DEVICE button
Press this button to select PLAYBACK device.
23. POWER button
When pressing this button while the MAIN switch on
the rear of this unit is set to ON, the power turns on
and the button lights. When the button is pressed
again, the unit will be in stand-by and the light will
turn off. When the unit is in operational transition such
as booting, the button will flash and other operations
are not accepted.
24. TIMER button
When pressing this button, the unit is set to timer
recording/stand-by and the TIMER indicator lights.
When pressing this button for more than 1 second,
timer recording/stand-by is cancelled and the TIMER
indicator turns off.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• QUICK GUIDE
DIGITAL RECORDER DX - TL 2500
OUTPUT B TIMER PRE ALARM M-DET EMERGENCY
VIDEO OUT AUDIO OUT
COMPACT FLASH
25 26
20
17 18 19
10 11 12 13
ACCESS COM LOCK
WARNING SET UP SEARCH COPY
RESET
MENU
CFC
OUTPUT A OUTPUT B
MULTIPLEXER
27 28
25. ANALOGUE OUT connectors
VIDEO OUT connector
Output connector for video signal (RCA pin).
AUDIO OUT connector
Output connector for audio signal (RCA pin).
26. COMPACT FLASH slot
Compact Flash Card can be used for saving/loading
data and menus. When not using the slot, attach the
COMPACT FLASH slot cover to prevent dust from
entering within the unit.
* Compact Flash
poration.
27. CFC (Compact Flash Card) indicator
Illuminates only when the CFC is selected by press-
ing the PLAY DEVICE button.
28. MULTIPLEXER buttons
OUTPUT A button
When this button is pressed operation of the camera
number buttons and the SPLIT/SEQUENCE button
switches image output to the OUTPUT A connector
and ANALOGUE OUT connectors.
OUTPUT B button
When this button is pressed operation of the camera
number buttons and the SPLIT/SEQUENCE button
switches image output to the OUTPUT B connector.
Please note that with this function, playback display
of an already recorded image is not possible. A play-
back image can not be output to the OUTPUT B con-
nector.
To display image of the monitor connected to OUT-
PUT B, set to "ON" in the setting of the "OUTPUT B
ON/OFF" of the <MPX DISPLAY SETTINGS> screen.
21 22
CLEAR/
REW
14 15 16
PAUSE/
STOP REV. PLAY( )
SHUTTLE HOLD
MAIN
ALARM
PLA PLAY DEVICE Y DEVICE
INTERRUPT
ARCHIVE
EJECT
COPY
29 30 31
TM is a trademark of SanDisk Cor-
ENTER/
FF
REC/STOP
ARCHIVE
PLAY( )
3