Klarstein Waterfall Manual De Instrucciones página 21

Waveform of natural wind
Strong
Medium
Weak
High speed:
Medium speed
Low speed
5. Direction button: in power on state, press this button to turn on/off swing
function, and the corresponding indicator displays its function; press this button to
turn on swing function and the swing indicator turns on; press it again to turn off
swing function;
6. Cool/Humidify button: in power on state, press this button to turn on/off
cooling/humidification, and the corresponding indicator displays its function;
7. Timer button: after connecting the power, the timer function is turned off in initial
state, and the digitron displays 0; after turning on, press this button to switch
among OFF, 1, 2, 3......9, and the digitron of corresponding level also changes
accordingly: "0" on → "1" on→ "2" on→ "3"on→ ......"9" on→ "0" on. No
memory is saved after restart, and changes back to "0";
8. Water shortage protection: If the software detects water protection switch
off (lacking water) for 5 seconds continuously when the water pump has been
working for 50 seconds, the water pump stops working; and the buzzer beeps 10
seconds.
9. Rear net protection switch: If the rear net is opened when the device is working,
the power supply will be disconnected.
If the rear net is not installed, the switch is in off state, the power input is cut off, and the
device enters standby state;
30 minutes high speed natural wind -30 minutes medium
speed natural wind - low speed natural wind (hold)
Medium speed: 30 minutes natural wind - low speed
natural wind (hold)
Low speed natural wind
EN
21