BGS technic 8841 Manual Del Usuario página 22

Legs
Align the holes of the Legs (1) and Cabinet
holes as shown and secure in place with the
Bolts (47), Flat Washers and Nuts. Repeat
with all 4 Legs, sliding the Shims (34)
between the Legs and Cabinet before
inserting the Bolts and securing in place.
The rear leg on the Door side of the cabinet
does not require a shim (34)
Connecting the Funnel, Hose and Cabinet
1. Place the Bottom Plate (9) which has foam on each side together with Screen Frame (10) on top
of the Funnel and secure the assembly to the bottom of the Cabinet with the Bolts (44) Flat
Washers and Nuts.
2. Connect the Sand Pickup Tube (8) to the to the blasting gun and the other side
3. Attach the Air Hose Inlet Fitting (45) to the lower right side of the cabinet.
 Connect one side of the Air Hose (52) to the blasting gun and the other side to the inlet
fitting (45). Secure both sides with air hose clamps (54).
 Connect one side of the Vacuum Suction Hose (46) to the blasting gun, connect the other
end to the Sand Pickup Pipe (8). Secure both sides with Vacuum Hose Clamps (53).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
7
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed