BGS technic 8841 Manual Del Usuario página 19

INITIAL TOOL SET UP / ASSEMBLY
Read the important safety information section at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Light Clamps
Attach the Light Clamps (37) to the inside of the
Cabinet Rear Plate (19) using the bolts which are pre-
assembled on the Light clamps.
Gloves
1. Secure the Glove Mounting Rings (33) and
Glove Seal Rings (30) to the Cabinet Front Plate
(17) using the Screws (48).
2. Slide the Gloves (41) over the Glove Mounting
Rings and secure in place with the Glove Clamps
(31).
Dust Port
Attach the Light Clamps (37) to the inside of the
Cabinet Rear Plate (19) using the bolts which
are pre-assembled on the Light clamps.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
4
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed