Steren 905-300 Manual De Instrucciones página 18

Example 2:
If you want to leave a device power on all day long (Constant Power On) and you want to turn it
off at 11:25 on Wednesday and then turn it on at 5:45 pm on Saturday, follow these steps:
1. Press Programming button (Prog). On screen appears the event number 2 on. You can start
to program.
2. Press Programming button to leave in blank the Input Time On (2 on) then you will pass to
next event 2 off.
3. Press Hour button until the number 11 appears on screen.
4. Press Minutes (Min) button until the number 25 appears on screen.
5. Press Week button until the We (Wednesday) word appears on screen.
6. Press Programming button.
7. On screen appears the event number 3 on.
8. Press Hour button until the number 17 appears on screen.
9. Press Minutes (Min) button until the number 45 appears on screen.
10. Press Week button until the Sa (Saturday) word appears on screen.
11. Press Programming button to store the changes.
12. Leave in blank the Off time and press the Programming button once again to store the event.
13. Plug an electrical device into some contact of the Digital Timer, make sure that the plugged
device is already On.
7