Keurig K400 Serie Guia Del Usuario página 21

CARING FOR YOUR BREWER
DESCALING YOUR BREWER (CONTINUED)
The cleaning action of Keurig Descaling Solution may result in a foam dispensed from the
TM
brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is
heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you
may see only a small or no output dispensed followed by the sound of air blowing out. If this
occurs:
• Turn off and unplug the brewer.
• If there is Keurig Descaling Solution in the Water Reservoir, discard the contents,
TM
rinse the Water Reservoir thoroughly and refill with bottled or filtered water.
• Plug the brewer back in, power on, and repeat STEP 3: FRESH WATER RINSE (refer to
page 39). The brewer should begin to function normally as the solution is rinsed out and
the scale is removed. If the problem persists, allow the brewer to sit unplugged for at least
30 minutes then continue with the fresh water rinse.
Scan this QR code with your smartphone for step-by-step videos on cleaning, descaling and
more. Or if you prefer, you can watch the videos online at Keurig.com
40
RECYCLING K-CARAFE PODS
TM
The plastic cups of K-Carafe pods can be
TM
recycled wherever #5 plastic is accepted.
#5 plastic may not be recyclable in your
community today, so please check locally
with your municipality or waste hauler,
or visit Keurigrecycling.com for more
information. #5 plastic is recyclable
everywhere in Canada.
5
For more information visit
www.keurigrecycling.com
2. Once cool, separate the lid and filter
from the cup. The filter will adhere to
the lid.
SECTION 2
1. Once brewing is complete, lift the Handle
and carefully remove the K-Carafe pod
TM
by holding the
outer rim.
CAUTION: The K-Carafe pod will be hot after brewing.
TM
Use caution when removing. Allow it to cool completely before
handling.
3. Once separated, discard the lid and the
attached filter. Recycle your K-Carafe
pod's plastic cup wherever #5 plastic
is accepted.
41
TM