Idiomas disponibles
Idiomas disponibles
4. Align leg bracket with holes in pedestal file. Use two
#8 x 1/2" screws to secure. Repeat for remaining
legs. (See Figure 3)
Figure 3
Screw
Leg
Bracket
5. With two people, set desk upright and position in
desired location.
6. With two people, turn return desk upside down.
7.
Follow steps 2-4 to install remaining legs.
8. Remove filler block and discard. (See Figure 4)
NOTE: Keep filler block screws for next step.
Figure 4
Filler Block
PAGE 2 OF 8
ASSEMBLY CONTINUED
9. With two people, set return desk upright and position
with top connector plate under assembled 30 x 66"
pedestal desk. Align holes and use five #8 x 3/4"
screws to secure. (See Figure 5)
Figure 5
10. Align bottom connector plate with holes in pedestal
desk and return desk. Use two #8 x 1/2" screws and
one #8 x 1/4" screw to secure. (See Figure 6)
Figure 6
#8 x 1/4" Screw
11. Adjust floor glides to compensate for uneven floors.
12. Place drawer dividers at desired locations in top
drawers and insert grommets into desktop.
1-800-295-5510
uline.com
NOTE: Remove #8 x 1/4" screw from bottom
connector plate before you install it. Once
bottom connector plate is aligned, use same
#8 x 1/4" screw to secure plate.
Bottom
Connector
Plate
Top
Connector
Plate
Screw
#8 x 1/2" Screw
0721 IH-8204
