Ilox SLS-1+ Manual De Instrucciones página 4

15.39
Instructions
When the device is connected to the 230V supply voltage, the small green LED
»Power« and the red display are lit up at the same time. By simply turning and
pressing (turn & press) the rotary knob, the eight different menu functions can
be selected and set to your wishes.
1. »CLOCK« (Timer)
Turn the knob and select menu item »CLOCK« (= green LED). During the first
start-up operation, »OFF« will be visible in the red display. This means that the
internal software clock is deactivated and the start/stop controller of the light
dim phase must be connected to an external timer (see terminals ST+/STi).
Should the internal timer switch function of the SLS-1 be used, then press the
+
knob for 5 seconds until bleeping sound and four horizontal dashes are visible
on the red display. The device is now ready to use the internal software timer.
To set the time, shortly press the knob and turn to the right hour (0–23) and
then to the right minutes (0–59). READY!
When you want to de-activate the internal timer function again, select the
menu item »CLOCK«. Press the knob for 5 seconds until »OFF« appears on
the red display.
4