Metabo BSA 14.4-18 LED Manual Original página 8

en ENGLISH
- Crystalline silica from bricks and cement and
other masonry products, and
- Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
This also applies to dust from other materials such
as some timber types (like oak or beech dust),
metals, asbestos. Other known diseases are e.g.
allergic reactions, respiratory diseases. Do not let
dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application and
place of application (e.g. occupational health and
safety regulations, disposal).
Collect the particles generated at the source, avoid
deposits in the surrounding area.
Use suitable accessories for special work. In this
way, fewer particles enter the environment in an
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- do not direct the escaping particles and the
exhaust air stream at yourself or nearby persons
or on dust deposits,
- use an extraction unit and/or air purifiers,
- ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or
blowing stirs up dust.
Vacuum or wash the protective clothing. Do not
blow, beat or brush.
2. Overview
See image on the title page.
1 Matt protective pane *
2 Handle
3 Window/outlet of LED beam
4 Screw thread (5/8"-UNC) for fastening the lamp
to a stand
5 Hole (8 mm diameter) for fastening the lamp to
a stand
6 Cut-out slot for wall suspension
7 Battery pack release button
8 Battery pack*
9 Clamping lever for angle adjustment
10 On/off switch
11 Transport position that protects the window
* depending on model
3. Use
Insert a fully charged battery pack (8) (taking into
account the particular model).
Release the clamping lever, adjust to the required
angle and then secure the clamping lever.
Turn on and off at the switch (10).
8
Do not direct the light beam into the eyes of
people or animals.
The ideal storage temperature for battery packs is
between 10°C and 30°C.
4. Cleaning
Remove the battery pack from the device
before carrying out cleaning.
Do not clean with aggressive cleaning agents.
Ensure that the lamp and the battery contacts are
dry.
5. Repairs
Repairs to Metabo machines must be carried
out by qualified electricians only!
If any of your Metabo power tools require repairs,
please contact your Metabo service centre. For
addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Replace defective pane (3):
Remove the 4 fixing screws of the supporting frame
of the pane (3) (on the rear side). Remove
supporting frame and defective pane. Insert new
pane (replacement part order no. 343442380) and
fix with the supporting frame and the 4 fixing
screws.