Tabla de contenido
You can use the advantage of the outdoor operation according to the operation of points 1B and 2B. The
advantage of outdoor use is that the noise level of the high-performance compressor is generated outside the
living/work space.
Remote control
1. Power
2. Timer
3. Mode
4. Temperature +
5. Temperature -
6. Fan sped
7. Sleep mode
Emptying of the water tank
When the water tank is full, "E2" error code will light up on the display.
To empty the water tank, please get off the cover (A), remove the
rubber stopper (B) on the bottom of the unit, and drain the water into
a suitable container (1L).
As an option, the water can be drained continuously by connecting a
drainage hose (ᴓ 18mm, length approx. 1m) to the opening. The
drainage hose is not included, but can be purchased in any
construction market.
The warning "E2" disappears as soon as the water tank has been
emptied; You can now restart the device by pressing the POWER button.
Cleaning
Before starting cleaning or maintenance, turn the power off by pressing the POWER button, wait a few minutes
and then unplug the power cord from the outlet.
Surface cleaning
Please unplug the unit.
Please clean the unit with a damp cloth and wipe it with a dry cloth. Please do not use any chemical solvents
(such as benzene, alcohol, etc.) to avoid damage to the surface.
Never clean the appliance under running water, always use a damp cloth.
Air filter cleaning
Please clean the air filters regularly. If the air filter is clogged with dust, the efficiency of the unit will be
reduced.
Please wash the air filters by immersing in warm water (approx. 40°C) with a neutral detergent, rinse under
running water and then dry with a soft cloth.
Do not operate the unit without an air filter.
Storage
Please unplug the power cord and empty the water tank.
Please let the unit to run in fan mode for about 2 hours to allow the internal unit to dry.
⑤
④
⑥
⑦
③
②
①
25
Tabla de contenido
