Release And Remove The Suction Head; Pull The Safety Filter Sack Over The Con; Insert And Lock The Suction Head; Pull Disposal Bag Over The Container - Baier BSS 608H Manual Del Usuario

Installing the safety filter sack
 Release and remove the suction head.
Illustration
 Insert the safety filter sack.
Illustration
 Pull the safety filter sack over the con-
tainer.
 Insert and lock the suction head.
Installing the dust disposal bag
Illustration
Note: The opening of the disposal bag
must be pulled all the way over the ledge of
the suction support.
 Release and remove the suction head.
 Attach disposal bag.
 Pull disposal bag over the container.
 Insert and lock the suction head.

Wet vacuum cleaning

DANGER
No dusts hazardous to health should be
sucked in during wet vacuuming.
Inserting the rubber lips
Illustration
 Remove the brush strips.
 Install the rubber lips.
Close the suction connection
Illustration
 Precisely fit the plug into the suction
connection.
 Insert the plug up to the stop.
Removing the safety filter sack
 Release and remove the suction head.
Illustration
 Pull over the safety filter sack.
 Take off the protective film and close

the ventilation hole with a self-adhesive

tab.
Illustration
 Pull the safety filter sack towards the
rear.
 Seal the suction connection opening of

the safety filter bag tightly with closing

slides.
Illustration
 Securely close the safety filter bag with

the attached cable tie.

 Remove the safety filter bag.
 Wipe the inside of the container using a

damp cloth.

 Dispose of the safety filter bag in a dust-

tight bag according to the statutory pro-

visions.
 Insert and lock the suction head.
– To suck wet dirt, always remove the
safety filter bag.
Removing the dust disposal bag
Illustration
 Release and remove the suction head.
 Put the disposal bag over.
 Pull the opening of the disposal bag out

toward the back over the suction sup-

port.
 Seal the dust bag tightly with cable ties

under the suction connection opening

and the ventilation hole.

 Remove disposal bag.
 Wipe the inside of the container using a
damp cloth.
 Dispose of the disposal bag according

to the local provisions.

 Insert and lock the suction head.
– To suck wet dirt, always remove the dis-
posal bag.
General
WARNING
The two flat fold filters may never be re-
moved during vacuuming.
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is
sucked up from a container, it is recom-
mended to deactivate the "automatic fil-
ter cleaning" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– 4
EN 21