Additional Safety Rules - Worx WX4046HT Traducción De Las Instrucciones Originales

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
10
10
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
5. SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Hedge trimmer
ADDITIOnAL SAFETY
POInTS FOR YOUR HEDGE
TRIMMER
1. Keep all parts of the body away from
the cutter blade. Do not remove
cut material or hold material to
be cut when blades are moving.
Make sure the switch is off when
clearing jammed material. A moment
of inattention while operating the hedge
trimmer may result in serious personal
injury.
2. Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge
trimmer always fit the cutting device
cover. Proper handling of the hedge
trimmer will reduce possible personal
injury from the cutter blades.
3. Keep cable away from cutting area.
During operation the cable may be hidden
in shrubs and can be accidentally cut by the
blade.
4. Hold the power tool by insulated
gripping surfaces only, because the
cutter blade may contact hidden
wiring or its own cord. Cutter blades
contacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
ADDITIOnAL SAFETY
RULES
1. Use the Hedge trimmer only in daylight or
good artificial light.
2. Know how to stop the Hedge trimmer
quickly in an emergency.
3. Never hold the Hedge trimmer by the
guard.
4. Never operate the Hedge trimmer with
damaged guards or without guard in place.
5. Remove the plug from mains before
passing the hedge trimmer to another
person.
6. Avoid operating while people especially
children are nearby.
7. Whilst using the Hedge trimmer always
En
Tabla de contenido
loading

Este manual también es adecuado para:

Wg200eWg201eWg204e

Tabla de contenido