Replacing The Battery - Conceptronic CUPS650 Guia De Inicio Rapido

English

Software Installation on your PC
Connected by USB to a PC or notebook, the Software enables
communication between the UPS and the computer. The UPS software
monitors the status of the UPS, shuts down the system before the UPS is
exhausted and can remotely observe the UPS via the Network (enabling
users to manage their system more effectively). Upon AC failure or UPS
battery low, UPS takes all necessary actions without intervention from the
system administrator. In addition to automatic file saving and system shut-
down functions, it can also send warning messages via SMS, e-mail etc.
IMPORTANT NOTICE:
Plug the UPS into the wall outlet to charge the UPS for over 8 hours before
using the UPS.

Replacing The Battery:

 Use a cross-type screwdriver to remove screws on bottom shell and
screws on backplane.
 Take off the top cover
 Loosen the black wire from the negative (-) terminal and red wire from
the positive (+) terminal.
 Connect the battery leads to the new battery.
 Note: Small sparks at the battery connectors are normal during
connection.
 Fasten the screws mentioned in the first step.
 Dispose of the old battery properly at an appropriate recycling facility.