helpful tips
if a fault occurs, first check the points listed below before taking the set for repair.
if you are unable to remedy a problem by following these hints, consult your dealer
or service center.
warning
: do not open the set as there is a risk of electric shock! under no
circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
problem
no sound
sound skips during playback
on the psa
track detail displayed briefly
and then "skipped" from psa
solution
– battery weak / incorrectly inserted.
correctly insert fresh battery.
– psa buttons pressed too quickly.
slow down. press firmly. indicator lights up.
– headphones not properly connected.
insert headphone plug into jack completely.
– mp3 file made at compression level exceeding
320kbps.
– use a lower compression level to record your file
into mp3 format
– electrical interference from other appliances,
e.g. mobile phones, fluorescent, lamps,
electric pylons.
move away from source of electrical interference.
– mp3 track encoded from software other than the
supplied musicmatch. use musicmatch to save the
mp3 file and download the song again:
1. open musicmatch.
2. in the My Library window, click Add. The Add
Tracks to Music Library dialogue box appears.
3. select the "skipped" song file from Files:=Add
= Exit (to close the dialogue box.)
4. in the My Library window, right click on the song
file. select Edit Track Tag(s) = OK to save the song
as a musicmatch mp3 file.
5. drag and drop the song file from My Library to
the Playlist window.
6. download the edited track to the psa (see
product manual pages19 & 22.)
helpful tips 27