Casals CCH32VCEK Manual De Usuario página 6

these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools
-Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control
-Use the power tool, accessories and tool bits etc in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
-Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained
-Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability null
and void.
Safety warning Hammer
- Wear ear protectors. Exposure to noise can cause
hearing loss.
- Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
- Hold the tool by the insulated gripping surfaces when
performing operations where the application tool or the
screw could contact hidden wiring or its own power
cord. Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock
Additional safety warnings
- CAUTION: In order to prevent overheating do not cover
the appliance.
- Ensure that neither the air access nor exit become either
totally or partially covered by drapery, clothing, etc., as this
increases the risk of fire.
- As an additional protection to the electrical supply for the
appliance, it is advisable to have a differential current device
with a maximum sensitivity of 30 mA. Ask for advice from a
competent installer.
- Do not use the appliance if the cable or plug is damaged.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the appliance.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
6
- Do not use the appliance if it has fallen on the floor, if there
are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance with damp hands or feet, or when
barefooted.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled
cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if its accessories are not properly
fitted.
- Do not use the appliance if the accessories or consumables
attached to it are defective. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- Keep the appliance in a dry, dust-free place, out of direct
sunlight.
- Do not use the appliance on any part of the body of a
person or animal.
- If the application tool should become blocked, switch the
machine off. Loosen the application tool.
- Before switching on the power tool, make sure that the
application tool moves freely. When switching on with a
blocked drilling tool, high torque reaction can occur.
- Use clamps or a vise to secure the object to be worked
in place. The work will be safer if both hands are free to
control the tool.
- Let the appliance running with no load for 30 seconds in a
safe position. If you notice serious vibration or other defects
stop the appliance immediately. Then check the problem
and /or proceed as we describe on Anomalies and Repair
clause.
- When working in amianthus/asbestos and/or silica stone,
the dust produced is extremely harmful to your health. Wear
protection against inhalation of this dust, in compliance with
current regulations on accident prevention.
- This appliance is for professional use.
- This appliance is not a toy. Children should be supervised
to ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Check the position of power cables before commencing
work ensuring they are well away from the work area.
- Keep hands and other body parts well away from the work
area whist the tool is in use.
- Always hold the body handle and side handle of the
power tool firmly. Otherwise the counterforce produced
may result in inaccurate and even dangerous operation.
- Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to explosion.
Penet
cause
- Do n
The b
seriou
- Do n
touch
- Imm
case t
Warni
with to
Descr
(CCH
A
B
C
D
E
F
G
H
I
J
K
Instal
Auxili
- Ope
- Turn
for ad
- Set t
positio
- The
loosen
- Set d
- Tigh
- Tigh
directi
Auxili
- Ope
- Turn
for ad
- Set t
positio
- The