Operation And Adjustment - Rosewill RMS-MT6020 Manual Del Usuario

TILT WALL MOUNT FOR LCD, PLASMA, and LED DISPLAYS
NOTE:
The mount arms must be attached with the tilt mechanisms facing outward (i.e. away from the middle of
the display). Otherwise, the tilt function cannot be accessed.
Part 3 – Final Assembly
1. With the help of another person, carefully lift your display and place it on the wall plate. Do not
release the display until the mount arms have securely hooked onto the wall plate.
2. Insert the safety rod through the wall plate and arms to prevent the display from being lifted from the
wall plate. A padlock can be inserted into the end of the rod to help prevent theft of your display.
IMPORTANT! The safety rod should be used at all times to prevent the display from being
accidentally knocked from the mount.

OPERATION AND ADJUSTMENT

1. To change the tilt angle of your display, have one person hold the display firmly in place while another
person loosens the tilt knobs located on each mount arm. Once loosened, you may move your display
to the desired position. Re-tighten the tilt knobs to lock the tilt angle in place. Do not release the
display until both tilt knobs are fully tightened.
2. Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to
ensure that no connections have become loose over time. Re-tighten as needed.
5
RMS-MT6020 User Manual