Steren CCTV-350 Manual De Instrucciones

Steren CCTV-350 Manual De Instrucciones

Soporte universal para cctv
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Before using your new Electronic insect killer, please read
Before using your new Universal CCTV bracket, please read
this instruction manual to prevent any damage. Put it away
this instruction manual to prevent any damage.
in a safe place for future references.
Before installing the support and the camera, plan carefully where and
how these will be placed.
Select a location for the camera with an ample view of the area
you would like to monitor. Be sure this place is free of dust and is well
illuminated, preferably with sunlight.
- Adjustable head.
- 360° rotation.
- 90° inclination.
- Mounting: wall or ceiling.
- Maximum load: 3kg.
Package content
- Four plastic anchors
- Four ¾" screws
- One bracket
INSTRUCTIONS
1.- Select a horizontal or vertical surface on which to install the support
brace.
2.- Mark on the surface the location of the holes for the screws that will hold
the support.
3.- Drill where you marked the holes.Install the support using the screws
provided.
4.- Place the camera on the support (Fig. 1).
5.- Using the butterfly screw, adjust the postition of the camera. The camera
can move 90° and the support head can rotate 360° (Fig. 2).
Fig. 1
IMPORTANT
HIGHLIGHTS
6-- Pass the cable through the hole in the base of the support and connect
the camera.
7.- Install the support using the screws provided.
Note: The thread is a standard one, so it is compatible with any CCTV
camera.
- Manufactured in aluminum
Before using your new Electronic insect killer, please read
Product design and specifications are subject to change
this instruction manual to prevent any damage. Put it away
without previous notice.
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
Fig. 2
SPECIFICATIONS
Product: Universal CCTV bracket
Part number: CCTV-350
Brand: Steren
WARRANTY
CONDITIONS
RETAILER INFORMATION
loading

Resumen de contenidos para Steren CCTV-350

  • Página 1 Be sure this place is free of dust and is well Brand: Steren illuminated, preferably with sunlight. WARRANTY This Steren product is warranted under normal usage against defects in HIGHLIGHTS workmanship and materials to the original purchaser for one year from the date of purchase.
  • Página 2 Electrónica Steren S.A. de C.V. - Fijación: techo o pared. 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación - Carga máxima: 3kg.