Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2f.) Using a T25 star driver, pulling back the wheel well trim, remove (2) screws
from both sides. See Figure 2
3. Remove bumper beam – Remove bumper beam and support band - Using a 18mm socket extension, remove (6) M12 bolts. Set fasteners aside to be reinstalled.
Return bumper beam and support band to owner. See Figure 1.
Existing M12 Bolts
(8) Places
©2020 Horizon Global™ Corp - Printed in Mexico
End panel
Support Band
Bumper beam
Figure 1
2g.) Carefully disconnect all wiring harnesses from fascia and safely set
fascia aside. (7 total)
Sheet 6 of 24
76338NP
06-17-20
Rev. A
Tabla de contenido
