Tabla de contenido
后面板
22
23
(22) 电压选择开关
用以在两个不同的AC线路/电源电压中进行选择。这通常应该不需要用户来调节，所以它罩有一层透明的
塑料盖板。应该已经设置到你所在国家/地区的正确线路/电源电压上了。
(23) AC电源插口:
这是IEC（国际电工委员会）电源线插座，向设备提供AC电源。将电源线连接到此插座，向设备提供电
源。如果使用不当电压，可能导致设备损坏。(请参阅电压选择开关 #22)。
千万不要折断任何设备上的接地脚。这是为了你的安全起见。如果使用的电源插座没有接地脚，则应使
用相应的接地转换器，并将第三根导线正确接地。为防止触电或火灾危险，一定要确认放大器及其所有
附加设备都正确接地。
NOTE: FOR UK ONLY
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows: (1) The wire which is coloured green
and yellow must be connected to the terminal which is marked by the letter E, or by the Earth symbol, or
coloured green or green and yellow. (2) The wire which is coloured blue must be connected to the terminal
which is marked with the letter N, or the colour black. (3) The wire which is coloured brown must be
connected to the terminal which is marked with the letter L, or the colour red.
To avoid the risk of electrical shock, do not place fingers or any other objects into empty tube sockets while
power is being supplied to unit.
(24) 熔断器
熔断器位于熔断器座的盖子中。一旦熔断器发生故障，必须用相同类型和相同电流值的熔断器来替换，
以避免损坏放大器并使保修失效。如果放大器的熔断器反复烧断，应将放大器拿到厂商指定的服务中心
进行维修。
警告：只有从电源上拔掉电源线后方可替换熔断器。
24
22
24
23
25
22
24
23
25
25
26
27
28
26
27
28
30
31
26
27
28
30
31
22
23
24 25 27
30
31
32
33
34
32
33
34
35
32
33
34
35
28
30
31 32
26
29
33
35
35
34
Tabla de contenido
