Labels - Chicago Pneumatic SAW 14 Instrucciones De Seguridad Y Funcionamiento

SAW 14, 16, Cart
Disassembling the cut-off saw from the cart:
Switch OFF the water lever of the tank and
1)
disconnect the water hose of the tank from the
nipple on the cut-off saw.
Disconnect the cable link from the trigger on
2)
the saw.
Disconnect the lever holder from the safety
3)
trigger of the saw.
4) Untighten the screws (1).
5) Disconnect the body of the cut-off saw from
the brackets (2).

Labels

The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
Data plate
B
E
C
H
Maximum permitted hydraulic oil flow
A.
B. Machine type
Maximum relief valve setting
C.
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. Serial number (is also stamped in the valve
housing).
The CE symbol means that the machine is
F.
EC-approved. See the EC declaration which is
delivered with the machine for more
information.
3392 5186 90a | Original instructions
D
F
Made in Bulgaria
A
G
Safety and operating instructions
G. Year of manufacture.
Maximum nominal operating pressure
H.
Direction of rotation
The red label on the blade guard shows the direction
of rotation.
Cutting blade speed rating
Never use a cutting blade with a lower speed rating
than the machine's. A minimum cutting blade speed
rating of 4400 r.p.m. is recommended.
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source
used is in a compatible category. If any doubt,
consult an authorised supervisor.
13