Overview; Design And Function; Main Parts - Chicago Pneumatic SAW 14 Instrucciones De Seguridad Y Funcionamiento

Safety and operating instructions

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

The SAW 14 and SAW 16 hydraulic cut-off saws are
powerful, light and compact machines designed for
working together with hydraulic power packs.
The cut-off saws are designed for cutting through
concrete, asphalt and steel with cutting blades for
both dry and wet cutting. They can be used with
both diamond blades and with abrasive discs. A dust
collector can be connected to the blade guard for
operation in areas where the use of water is not
possible. No other use is permitted.
A separate water kit with pressure tank is available
(see the spare parts list).
The simple hydraulic design with direct drive,
reduces maintenance and provides consistent speed
and torque.
The SAW 14 and SAW 16 cut-off saws are delivered
with 2 m ⅜ in. tail-hoses with ½ in. 'Flat-Face'
quick-release couplings.

Main parts

Trigger
A.
Valve block
B.
C. Frame
D. Front handle
Guard
E.
12
F. Hydraulic motor
Hydraulic hose
G.
Water valve
H.
Cutting blade
I.
J. Quick release couplings
Cart for the cut-off saw
The cart for the cut-off saw is recommended for
precise and clean cutting jobs on roads, pavements
and floors.
The use of the cart gives a better working posture,
and the cutting depth can be adjusted by means of
an arm at the front of the cart. The cart is equipped
with a water kit. The cart is not standard equipment.
1
2
3
4
Assembly the cut-off saw in to the cart:
1) Untighten the screws (1).
Set the body of the cut-off saw between the
2)
brackets (2).
3) Tighten the screws (1).
Set the lever holder (3) over the safety trigger
4)
and tighten it.
5) Set the cable link over the trigger (4) and
tighten it.
Connect the water hose of the tank to the
6)
nipple of the cut of saw and switch ON the
water lever of the tank.
The depth of cutting can be adjusted with the
7)
screw (5).
3392 5186 90a | Original instructions
SAW 14, 16, Cart
5