FITFIU FITNESS GYM-100 Manual De Instrucciones página 43

NOTE: The washer should be placed on both ends of all bolts (against the bolt head and against
the nut) unless otherwise specified in these instructions.
Hand tighten all bolts on initial assembly and finally tighten with the spanner once the entire
structure is erected.
Some parts may come pre-assembled from the factory.
STEP 1
1. Place the foot caps(#51) on the ends of the parts(#14,#22). Insert the plug 50*50(#49) into the part(#12).
2. Attach part(#3) to part(#14) using the hexagonal screw M10*25(#63). Tighten the screw with a spanner.
Attach part(#14,#24) to part(#2) using (2)hex bolts M10*75(#67). Tighten the bolt with a spanner here.
3. Attach part (#12, #22) to part (#2) using (2) M10*75(#67) hex bolts.
4. Attach part (#6) to part (#2) using (2) M10*75(#67) hex bolts.
43
GYM-100
EN