Setting Security Arrangement; Setting User Code And Change Alarm Code - PRASTEL Fingerkey Manual Del Usuario

In order for this feature to work, door contacts must be
connected. There are 2 programming functions that work
together in this mode:
a.) If door not closed after opening, intramural buzzer
sounds.
b.) If door forced open, intramural buzzer sounds and sends
alarm signal.

Setting Security Arrangement

There are two levels of keypad security available for the
Fingerkey.
Press: 7 0 0 # to disable this feature (factory default
setting).
Press: 7 0 1 # entered 4 wrong passwords in
succession, the keypad is locked for 10 minutes.
Press: 7 0 2 # entered 4 wrong passwords in
succession, the keypad activates and alarm signal.

Setting user code and change alarm code

To change user code
The factory default setting for each user password code
1234. With password 1234 the user is disabled. The
password can be modified so that each user has a unique
individual 4 digit code.
Press: 8 user ID # new code #
To change white alarm code
Press: 8 new code # re-enter new code #
- 28 -