Introduction - PRASTEL Fingerkey Manual Del Usuario

FINGERKEY uses the latest microprocessor and DSP
technology to operate door strikes and security systems that
require a momentary (timed) or latching dry contact closure.
All programming is done through the keypad. Codes and
operating parameters are stored within the Eeprom memory
and can not be lost due to power failure.
The Fingerkey has 1 supervisor, and can store 800 users
with:
•
2 fingerprints each
•
3-digit ID code
•
4-digit password
•
10-digit programmable output data, which could be
output with Wiegand 26 or Wiegand 34.
The unit has one relay with 5 Amp contacts.
Can be installed outdoors if suitably protected against
the rain.

Introduction

- 19 -
GB