Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Install Hitch - Raise hitch into position, over the exhaust, and feed the pull wires through bracket slots. Remove pull wires and loosely install conical washers ③,
hex nuts ④ to the hitch. Loosely install carriage bolt ⑤, spacer ⑥, conical washer ⑦, hex nut ⑧ through hook bracket of hitch and vehicle tow hook, see Figure
4 & 5.
7. Tighten all 7/16-14x1.25 GR 5 fasteners to 50 ft-lb (68 N*m) and 1/2-13x2.00
GR 5 fastener to 75 ft-lb (102 N*m).
8. Reinstall (4) rivets on bottom of fascia and return (1) rivet to owner and reinstall the muffler hanger to move the muffler back into position.
©2020 Horizon Global Americas Inc. - Printed in Mexico
5
Hook Bracket
of hitch
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 6 of 18
76342NP
6
7
8
Vehicle Tow
Hook
10-12-20
Rev. A
Tabla de contenido
