Maintenance And Cleaning; Maintenance Intervals; Maintenance Interval Table - Deltafox DG-ECS 1830 Manual Del Usuario

Motosierra eléctrica

Tabla de contenido

Idiomas disponibles

direction or if it bends back, and

if the chainsaw is stuck, dis-

continue the felling cut and use

wooden, plastic or aluminium

wedges to open the cut and fell

the tree to fall into the desired

fall line.

5. If the trunk diameter is larger

than the length of the chain bar,

make two cuts.

For safety reasons, we advise in-

experienced users not to fell any

logs with a rail length which is

smaller than the trunk diameter.

After carrying out of the back cut, the

tree falls by itself or with the aid of the

felling wedge or crowbar. .

As soon as the tree begins to

fall, pull out the saw from the

Maintenance intervals

Regularly carry out the maintenance operations listed in the following table. The life of

the saw is extended by regular maintenance of your chainsaw. Furthermore, you get

optimum cutting performance and avoid accidents.

Maintenance Interval Table

Machine part

Components of the

chain brake

Sprocket chain wheel Check, replace if required

Saw chain

Guide bar

Action

Check, replace if required

Check oil, regrind or replace if

required

Check, turn round, clean and

oil

section, stop the motor, place

the electric chainsaw down and

leave the workplace using the

withdrawal path.

Be completely aware of the fall-

ing cut material