Tabla de contenido
12
Using the Charge Pockets
There are four charging pockets on the Multi-Charger Plus. The Multi-Charger Plus charges each
battery pack in less than four hours.
Placing the Battery Pack into the Multi-Charger Plus
Orienting the Battery Pack
Caution!
!
When preparing the battery pack for insertion into the charger pocket, hold it with the Back (the
side with only three metal contacts and grooved surface) upward, and the Top (the side with the
metal retaining clip) to the left. The Front (the side with the six contacts and the smooth surface)
will face downwards, into the charging pocket.
Inserting the Battery Pack
Lower the battery pack straight into the battery charger pocket and push it down firmly until the
retaining clip catches on the retaining pins.
Caution!
!
MX3 Multi-Charger Plus User's Guide
It is important that battery pack is inserted into the charging pocket correctly.
Inserting the battery incorrectly could result in damage to the battery pack or the
charger/analyzer.
Figure 5 Battery Charger Pocket Insertion
Do not "slam" or slide the battery pack into the charger/analyzer. Damage may
result.
Using the Charge Pockets
E-EQ-MX3MCPLUS-F-ARC
Tabla de contenido
