Masterpro BGMP-9132 Manual De Instrucciones página 14

EN
VACUUM BLEND cycle:
vacuuming + 3 x pulsing + 30 s blending
6. Press the VACUUM BLEND MODE button till you
will hear the beep sound and the mode light will start to
flash. Press the VACUUM BLEND MODE button to
start the vacuum blend cycle, you will hear the beep
sound and the mode light will turn on. After the cycle is
completed, the device will stop and switch to stand by
mode automatically.
Device vacuums until maximum vacuum is reached.
7. Lift the vacuuming head and disassemble the cup from
the main device.
8. Store the vacuum cup and the content or release the
vacuum by gently pulling the silicone valve flap to the left.
Always release the vacuum first before opening the
700ml cup.
Before use and when
operation is finished,
always press the OFF
button.
06
VACUUMING
USAGE WITH 700 ML CUP AND 6 WING BLADE ASSEMBLY
1. Disassemble the blade 2. Fill in the ingredients up to
assembly to the cup by the MAX level marked on the
rotating it counter-clockwise. cup.
NOTE: The content should
never exceed the MAX level.
4. Place the cup onto the main 5. Insert the vacuuming device into the main body (remove cover
unit and rotate it clockwise before that if needed) flip it to 90°, attach the vacuuming nozzle
until you hear »click« sound. onto the valve and press the head down slightly.
3. Assemble the blade
assembly to the cup by
rotating it clockwise.
MAX
07
EN