Inglesina zippy free Manual De Instrucciones página 37

HANDLE ADJUSTMENT (FOR MODELS, WHERE IT
IS FORESEEN)
Fig. 17 The Frame is equipped with adjustable
handles in terms of height and direction; to adjust
the handle to the wished position, act on the inter-
nal push-buttons L.
REAR WHEELS BRAKE
Fig. 18 To engage the brake, push downwards
the lever M positioned on the rear wheels. Always
engage the brake during stops.
FRONT WHEELS BLOCKING/RELEASE
Fig. 19 The Frame is equipped with pivoting
wheels that can be blocked or released simply
by acting on the lever N positioned on the front
wheels.
REAR PLATFORM
Fig. 20 Act with the foot on the rear platform to
ease the crossing of obstacles.
FEEDING BOTTLE HOLDING UNIT
Fig. 21 Hook the feeding bottle holding unit to
the frame and make sure it is properly in its seat.
STORAGE BASKET
Fig. 22 The Frame is equipped with a capacious
Storage basket. To secure it, insert all buttonholes in
the proper hooks and button up the rear strips.
ADDITIONAL TRANSPORT UNITS TO THE FRAME
(CARRYCOT, TRANSPORT SEAT, AND CAR SEAT)
Fig. 23 The Frame can be used together with
Carrycot, Transport Seat, and Huggy Car Seat.
CARRYCOT
HOOKING OF THE CARRYCOT TO THE FRAME
Before hooking the Carrycot, it is necessary to pro-
ceed as follows:
Fig. 24 Remove the armrest covers X, if available,
by pressing with the index fi nger the hooking lever
O positioned inside the armrest.
Fig. 25 Insert the two stabilizing supports P in
the openings Q.
CAUTION: The stabilizing supports have to be
inserted only when using the Frame with the
Carrycot.
Fig. 26 By holding the Carrycot by the handle,
attach it to the armrests R, positioning it exclusively
facing mum.
Fig. 27 CAUTION: Make sure that the Carrycot
is always properly attached on both sides of the
INSTRUCTIONS
Frame before use.
UNHOOKING OF THE CARRYCOT FROM THE
FRAME
Fig. 28
to the Carrycot.
Fig. 29
ding it by the handle.
TRANSPORTATION HANDLE
Fig. 30
neously on the side push-buttons.
Fig. 31
always hold it by the handle.
HOOKING OF THE HOOD
Fig. 32
on the Carrycot.
Fig. 33
cot.
UNHOOKING OF THE HOOD
Fig. 34
from the Carrycot.
ADJUSTMENT OF THE HOOD
Fig. 35
HOOD VENTILATION (FOR THE MODELS WHERE
IT IS FORESEEN)
Fig. 36
insert allowing ventilation inside the Carrycot.
HOOKING OF THE BLANKET
Fig. 37
Carrycot.
MAINTENANCE OF THE INTERNAL LINING
Fig. 38
Lining periodically to provide for its correct mainte-
nance.
ADJUSTMENT OF THE BACKREST
Fig. 39
Fig. 40
under the Carrycot.
HUGGY CAR SEAT
HOOKING OF THE SEAT TO THE FRAME
Before hooking the Seat to the Frame, it is necessary
to proceed as follows:
Fig. 41
ports P by acting on the proper push-buttons V.
Act on the lever S positioned externally
Simultaneously, lift the Carrycot by hol-
Adjust the handle by acting simulta-
CAUTION: To transport the Carrycot,
Insert the two ends T in the proper seats
Hook all available buttons to the Carry-
To unhook the Hood, extract it fi rmly
Adjust the Hood to the wished position.
The Hood is equipped with a net fabric
Hook all buttons of the Blanket to the
It is recommended to remove the Internal
To lift the backrest just pull it upwards.
To lower it, act on the lever U positioned
If present, remove the stabilizing sup-
37