Inglesina zippy free Manual De Instrucciones página 36

for garments.
Respect the washing regulations for the textile
lining born on the suitable labels.
Handwash in cold water.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
LIST OF COMPONENTS
FRAME
Fig. 1
T1 Front wheel assembly
T2 Rear wheel assembly
T3 String blocking plug
T4 Armrest cover
T5 Big handrail (facing the street)
T6 Handrail covering
T7 Feeding bottle holding unit
T8 Stabilizing supports
TRANSPORT SEAT
Fig. 2
R1 Small handrail (facing mum)
R2 Transport Seat hood
CARRYCOT/CAR SEAT
Fig. 3
C1 Carrycot
C2 Carrycot blanket
C3 Carrycot hood
C4 Huggy car seat
FRAME
ASSEMBLING THE REAR WHEELS
Fig. 4 Press the push-button A and hook the
rear wheels until hearing a CLICK signalling the oc-
curred hooking.
Fig. 5 Insert the strap B in the proper seat on
the Frame.
Fig. 6 Insert the string blocking plug C.
CAUTION: The correct assembly of the joined
brake is important for the safe use of the Frame.
36
WARNING!
Dry the textile lining completely before using or
storing it.
To prevent formation of mildew, it is advisable to
air the Carrycot periodically. In detail, separate the
textile lining from the structure and run a dry cloth
over the bottom.
INSTRUCTIONS
Fig. 7
plastic plug, it is possible to remove it as shown in
fi gure; then, repeat the procedure.
ASSEMBLING THE FRONT WHEEL ASSEMBLY
Fig. 8
ring a CLICK signalling the correct hooking.
CAUTION: Make sure that the wheels are pro-
perly hooked before use.
Fig. 9
press the spring H and extract the assembly simul-
taneously.
FRAME OPENING
Fig. 10
on the right handle, fi rmly lift the Frame until it is
completely open.
Fig. 11
pedal control E till the horizontal blocking position.
Fig. 12
are properly attached on both sides before use.
FRAME CLOSING
Fig. 13
handle G.
Fig. 14
Frame is completely closed.
Fig. 15
the central articulated joint.
TRANSPORTATION HANDLE
Fig. 16
proper handle I. Do not lift the Frame by the ope-
ning handle G.
In case of problems when mounting the
Hook the front wheel assembly until hea-
To remove the front wheel assembly,
Keeping pressed the lever D positioned
Complete the procedure by acting on the
Make sure that all closing mechanisms
By pressing the red push-button F, lift the
Pull the handle fi rmly upwards until the
Make sure that the lever D is attached to
To transport the closed Frame, use the