Meter Description - Trotec BG20 Manual De Instrucciones

Meter Description
1. LCD display
2. Power ON/OFF
3. MODE key
4. Power on/
Alarm light
5. SEL key
6. Sensor
7. Battery cover
B - 4
Operation
Measurements
Important: Ensure that the meter is turned on in an
area free of CO. If not, the meter will read incorrectly
when subsequently measuring CO.
1. Press the ON/OFF button to turn the
meter on. Allow time for the meter
to perform the self test and for the
display to settle.
2. To use the meter, trace the CO10 around the area of the
suspected leak.
3. The meter will indicate the presence of CO (in ppm) on the
LCD display. An audible beep will sound at 35 ppm alerting
the user that the threshold of dangerous CO levels has
been detected. The higher the concentration of CO, the
faster the beeper will sound. Above 200 PPM the beeper
will sound continuously.
4. To turn the meter off, press the ON/OFF key. If the meter
is left on, the meter will automatically power off after
15 minutes.
Operating Manual – Carbon-Monoxide-Meter
G